User Manual

Installation for MS-DOS
Setup the WaveLAN Parameters
D-22 WaveLAN IEEE 802.11 PC Card User’s Guide
Table D-3 WaveLAN Packet Driver Parameter Values
Parameter Description
WaveLAN_Network_
Name
Alphanumeric string with a maximum of 32 ASCII
characters that identifies the network to which you
would like to connect your computer.
Valid Values: any character in the range of “a-z”
and “0-9” (no spaces allowed) where:
■ The value “ANY” enables your station to
connect to any IEEE 802.11 network.
■ A user-defined name allows your station to
connect to a specific network only.
This value should matches the value as set for
the WavePOINT-II access points in your
network.
Station_Name Alphanumeric string with a maximum of 32 ASCII
characters that will identify your computer on the
network, e.g. when using the WaveMANAGER/
CLIENT diagnostics tool.
Valid Values: any character in the range of “a-z”
and “0-9” (no spaces allowed).
AP_Density Parameter that controls the Roaming sensitivity of
your computer (must be set according to the
settings of the WavePOINT-II access points).
Valid Values:
1. Low Density (default)
2. Medium Density
3. High Density
Transmit_Rate
1
Controls the data rate at which your WaveLAN
card will transmit its data.
Valid Values:
1. Fixed 1 Mbit/second
2. Fixed 2 Mbit/second
3. Auto Rate Select 2 Mbit/s -1 Mbit/s (default)
....continued on following page.