User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Installation for MS-DOS
Setup the WaveLAN Parameters
WaveLAN IEEE 802.11 PC Card User’s Guide D-21
At the end of the “
PACKET.INI” file you will find an additional set of
generic Packet Driver parameters that are not directly related to
WaveLAN operation.
;DRIVER_CLASSX
;NOVELL_FLAGYES/NO
;PACKET_INTERRUPT0x XX
4. Consult your LAN Administrator to select the appropriate
values that apply in your situation from the range as specified
in Table D-4 on page D-24.
5. When finished, save the “
PACKET.INI” file and restart your
computer.
6. Proceed with “Finishing Installation” on page D-25.