User Manual

Installation for MS-DOS
Setup the WaveLAN Parameters
D-16 WaveLAN IEEE 802.11 PC Card User’s Guide
8b WEP Key 2 See 8a WEP Key 1
8c WEP Key 3 See 8a WEP Key 1
8d WEP Key 4 See 8a WEP Key 1
8a WEP Transmit Key Use this parameter to select one of the
identified WEP decription keys for
encrypting data that will be transmitted via
the wireless interface.
Valid values:
■ 1 - to use WEP Key 1
■ 2 - to use WEP Key 2
■ 3 - to use WEP Key 3
■ 4 - to use WEP Key 4
9 Media Frame Type Use this parameter to select the frametype
that is used within the network to which you
wish to connect the computer. Consult your
LAN Administrator for the value that applies
in your network.
Valid values:
■ Ethernet 802.2 (=default)
■ Ethernet 802.3
■ Ethernet 802.II
■ Ethernet 802.SNAP
1 This parameter does not influence at which data rate the station will
be able to receive data. I.E. When the transmit rate is locked to
Fixed Low, the station may still receive messages that were
transmitted at Standard speed.
2 Note: The Access Control security feature of WavePOINT-II access
points does not recognize Local MAC addresses. When the
WavePOINT-II devices in your network infrastructure have been
programmed to use this feature, leave this parameter Access Control
Table D-2 WaveLAN DOS ODI Driver Parameters—Continued