User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Troubleshooting
Upgrading the WaveLAN Miniport Driver
B-18 WaveLAN/IEEE Turbo 11 Mb PC Card
Upgrading the driver for Windows 95 B
To upgrade the WaveLAN Miniport driver on a Windows 95
system, you will typically need to perform the following three steps:
1. Remove the current WaveLAN Miniport Driver.
2. (Optional) Physically delete the driver file from your hard
disk.
3. (Re-)install the latest WaveLAN Miniport Driver.
Step 2 is optional, subject to the type of driver you have currently
installed:
■ When the interface of your current driver looks as displayed in
Figure B-7 on page B-18, you
must
delete the driver files from
the hard-disk,
prior
to installing the new drivers.
■ When the interface of your current driver looks as pictured in
Figure B-8 on page B-19, you may, but do not need to delete
the driver files from the hard-disk.
Figure B-7 Interface of early WaveLAN Drivers