User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Troubleshooting
Windows Operating Systems
B-6 WaveLAN/IEEE Turbo 11 Mb PC Card
■ “Closed” System (see “Closing the Infrastructure” on page
6-2).
■ Station not authorized to access network (see “Wireless
Access Control” on page 6-3).
■ Card defect
■ “Hardware Conflict” on page B-6
Hardware Conflict B
When installing adapter cards or peripheral devices on a computer
you may occasionally run into hardware conflict that may:
■ prevent your WaveLAN card from working properly, or
■ disturb operation of other devices after the installation of the
WaveLAN drivers.
Such problems are most of the times caused when multiple
devices installed onto your computer are using identical values for
I/O Base Address and/or Interrupt Request (IRQ).
The factory-set values of your WaveLAN cardhave been set to use
the following defaults:
Table B-2 Default Strappings of the WaveLAN Hardware
Device Resource Default Value
WaveLAN IEEE 802.11 PC Card
1
1 For older driver versions the default I/O Base Address value is 0300
I/O Port 0400-0437
IRQ 10