User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Troubleshooting
LED Activity
WaveLAN/IEEE Turbo 11 Mb PC Card B-3
Off Off Card is not powered on, so it can not
transmit/receive data.
The cause may either be:
■ No Driver loaded/installed
■ Card - Driver mismatch which prevented
the driver from loading
■ Device conflict which prevented the driver
from loading
Actions:
■ Verify if a driver has been installed, if not
install the driver.
■ Verify the device settings of the PC Card
to determine the occurrence of a conflict
with another device. If so, change the
settings of either your WaveLAN or the
conflicting device to resolve the problem.
■ Verify the versions of the driver, and the
embedded software in the WaveLAN card
(also referred to as Station firmware).
■ Consult the WaveLAN website to see if
newer versions are available and if so,
upgrade both the embedded software and
driver to the latest available version.
Table B-1 LED Activity Table—Continued
Power LED Transmit
Receive LED
Description/Action