User Manual

Troubleshooting
LED Activity
B-2 WaveLAN/IEEE Turbo 11 Mb PC Card
Table B-1 LED Activity Table
Power LED Transmit
Receive LED
Description/Action
Continuous
Green
Blinking Standard operational mode.
■ Card is powered on.
■ Sensing/transmitting wireless data.
Off
■ Card is powered on.
■ No wireless activity.
No action is required.
Flicker Flicker
Power Management mode:
■ Card is powered on, but set to power
saving mode, to conserve battery life.
■ Flashes indicates that the card wakes up
at regular intervals to verify if there is
wireless data addressed to your computer.
Both LEDs blink once
every 10 seconds
WaveLAN card works fine, but did not yet
succeed establishing a wireless connection
with the wireless Infrastructure.
Actions:
■ Contact the LAN Administrator to verify the
WaveLAN Network Name assigned to the
wireless infrastructure.
■ Contact the LAN Administrator to verify the
correct value(s) of the encryption keys.
■ Contact the LAN Administrator to verify
whether the network infrastructure has
been closed (see page 6-2).
■ Change the configuration of your
WaveLAN PC Card to enter the correct
WaveLAN Network Name
■ If there are no WavePOINT-II devices
available, change the configuration of your
WaveLAN PC Card to run in “Ad-hoc
Demo mode.