User's Manual
Table Of Contents
- Introduction
- Parts of the PPT 2800
- Parts of the PPT 2800 (continued)
- Installing the SIM Card (PPT 2837 Only)
- Installing Batteries
- Charging the Battery
- Attaching the Handstrap
- Starting the PPT 2800
- Using the PPT 2800
- Initiating a Network Connection
- Resetting Your PPT 2800 Terminal
- Maintaining the PPT 2800
- Troubleshooting
- END-USER LICENSE AGREEMENT
- Ergonomic Recommendations
- Regulatory Information
5
Quick Reference
Installing Batteries
Before using your PPT 2800, install a lithium-ion battery:
1. Open the latches on the battery door and lift the battery door
away from the PPT 2800.
2. Insert the lithium-ion battery in the battery compartment with
the battery tether positioned properly (as shown below),
making sure the battery snaps into place.
3. Replace the battery cover by inserting the bottom first, then
pressing the top in firmly while securing the latches.
Latch
Latch
Tether