User's Manual

24
PPT 2800 Series
for Pocket PC 2002
the volume is not turned down.
PPT 2800 terminal turns itself off:
• Your PPT 2800 terminal turns off after a period of inactivity.
This period can be set from one to five minutes, in one-
minute intervals. Check the Power dialog box (in the Sys-
tem tab under Start/Settings), and change the setting if you
need a longer delay before the automatic shutoff feature ac-
tivates.
PPT 2800 terminal doesn’t recognize my handwriting:
• If you’re using the Block Recognizer input method, charac-
ters must be written a certain way. See the PPT 2800 Prod-
uct Reference Guide for information about how to write
character strokes.
• If you’re using the Block Recognizer or Letter Recognizer in-
put method, make the character strokes in the lower charac-
ter entry area on the screen — not on the display part of the
screen.
• Make sure you are writing letters and numbers in the appro-
priate section of the writing area.
Tapping the screen buttons or icons does not activate the
corresponding feature:
• Align the screen. Choose Screen from the System tab un-
der Start/Settings, or hold down the Function button and
press the Action button.
A message appears stating that your PPT 2800 terminal
memory is full:
• Delete unused memos and records. You can save these
records on your computer.
• Adjust the memory allocation. Select Start, then Settings,
and select the System tab. Tap Memory and adjust the slid-
er.