User's Manual
Table Of Contents
- Introduction
- Parts of the PPT 2800
- Parts of the PPT 2800 (continued)
- Installing the SIM Card (PPT 2837 Only)
- Installing Batteries
- Charging the Battery
- Attaching the Handstrap
- Starting the PPT 2800
- Using the PPT 2800
- Initiating a Network Connection
- Resetting Your PPT 2800 Terminal
- Maintaining the PPT 2800
- Troubleshooting
- END-USER LICENSE AGREEMENT
- Ergonomic Recommendations
- Regulatory Information
20
PPT 2800 Series
for Pocket PC 2002
4. The terminal indicates a successful scan by changing the
LED from red to green, beeping one or more times, and/or
displaying the bar code data on the screen.
If the PDF417 symbol is too “tall” where the vertical scan pattern
is not high enough to cover it, move the scan pattern slowly down
toward the bottom of the symbol, keeping the beam horizontal to
the rows, then slowly back up toward the top.
Using a Headset (PPT 28XX Color and PPT 2837 Only)
The headset is required for telephony
operation.
To use the headset, plug the headset jack
into the audio connector on the top of the
terminal.
Initiating a Network Connection
Before using the terminal, set up the Spectrum24, CDPD (Cellular
Digital Packet Data) or GSM (Global System for Mobile
Communication) network connection. Refer to the PPT 2800
Series for Pocket PC 2002 Product Reference Guide for setup
instructions.