User Manual

15
Quick Reference
No sound:
• Check the Volume Control slider in the Volume & Sounds
Properties screen (under Start/Settings) to make sure the vol-
ume is not turned down. See the
PPT 2700 Product Reference
Guide
for more information.
PPT 2700 terminal turns itself off:
• Your PPT 2700 terminal is designed to turn itself off after a pe-
riod of inactivity. This period can be set from one to five min-
utes, in one-minute intervals. Check the Power Off tab on the
Power screen (under Start/Settings), and change the setting if
you need a longer delay before the automatic shutoff feature
activates. See the
PPT 2700 Product Reference Guide
for
more information.
PPT 2700 terminal doesn’t recognize my handwriting:
• For your PPT 2700 to recognize handwriting input with the
stylus, characters must be written a certain way. See the
Mi-
crosoft
®
Windows
®
CE Palm-size PC User’s Guide
for infor-
mation about how to write character strokes.
• Make the character strokes in the lower character entry area
on the screen — not on the display part of the screen.
• Make sure you are writing lower-case letters in the left-hand
side, numbers in the right-hand side, and upper-case letters in
the center of the writing area.
Tapping the screen buttons or icons does not activate the
corresponding feature:
• Recalibrate the digitizer. Choose Stylus from Start/Settings
and select Recalibrate.
A message appears stating that your PPT 2700 terminal memory is
full:
• Delete unused memos and records. If necessary, you can save
these records on your computer.