User Manual

Preliminary
7
Quick Reference
Inserting Phaser in the Cradle
Place the Phaser scanner in the cradle so that the top of the scanner
sits in the larger part of the cradle and the metal contacts on the
bottom of the scanner touch the contacts on the cradle, like so:
Sending Data to Host Computer
To set up the PhaserLink Cradle for communications between a
Phaser and a host computer:
1. Connect the cradle to the host computer as described in
Connecting To The Host
on page 4.
2. Insert the Phaser in the cradle.
3. Start the communications program on the host computer and
the Phaser.
Recharging the Battery in the Phaser
1. Connect the cradle to a receptacle supplying AC power of the
proper voltage level.
2. Place the scanner in the cradle, ensuring the metal contacts on
the bottom of the scanner touch the contacts on the cradle.
3. A complete charge takes up to 4 hours, depending upon the re-
maining charge in the battery of the scanner.