User Manual
Table Of Contents
- Introduction
- Equipment Supplied
- Save the shipping container for storing or shipping. Inspect all your equipment for damage. If an...
- Related Documentation
- Parts of the Cradle
- Connecting To The Host
- Daisy-Chaining
- Wall Mounting
- Inserting Phaser in the Cradle
- Sending Data to Host Computer
- Recharging the Battery in the Phaser
- Indicator LED
- Troubleshooting
- Cleaning
- Regulatory Information
- Service Information
- Warranty
Preliminary
8
PL 470 Base Cradle
Indicator LED
Once the scanner is placed in the cradle, it will wait 15 minutes to
start charging the battery in the scanner. The LED blinks in a
specific pattern to show what the cradle is doing:
Troubleshooting
If the cradle does not work after you’ve followed these operating
instructions:
• Check the system power.
• Check for loose cable connections.
• Check the scanner is sitting properly in the cradle.
Cleaning
Wipe the cradle periodically with a lens tissue or other material
suitable for cleaning optical material, such as eyeglasses.
Caution:
Do not pour, spray or spill any liquid on the cradle.
Off
The scanner is not in the cradle
Slow Blink
Scanner is in cradle, not charging
Fast Blink
Scanner is in cradle, charging
On
Scanner is in cradle, charge cycle is complete