User's Manual

Section 3: Using the PCS Connection Card
3C: Voice Connections 59
Outgoing Calls
To initiate a call:
1. Connect a headset to the card, if one is not already
connected.
2. If the keypad is not displayed, then:
Notebook / Handheld PC: click the keypad button.
Pocket PC: tap Tools > Voice Call.
3. Enter the number you want to dial by either clicking the
number buttons on the keypad or typing the numbers on
your keyboard.
4. Click the TALK button.
Note: You cannot make a phone call when there is an active PCS Vision
connection. You can make phone calls during dormant PCS Vision
connections. For information on dormancy, see page 52.
Tip: If you click the TALK button without entering a number, the card
redials the last number you dialed.
If you are roaming and Call Guard is enabled (page 92), the
card beeps and a screen appears stating that a roaming rate
applies.
As the call is being dialed, the PCS Connection Manager
displays “Dialing” and the phone number.
Once the call is answered, “In Use” is displayed.
You can also dial a number from the Phone Book (see page
67 for notebook PCS and page 71 for Handheld/Pocket PCs)
and from the Call Log (see page 71).