User's Manual

Section 3: Using the PCS Connection Card
3B: Data Connections 51
PCS Vision (High-Speed) Connections
Important: If the following icon appears in the indicator area of
the PCS Connection Manager window, you do not currently
have PCS Vision service and cannot make a connection:
At installation, the PCS Vision connection profile is created
for you by the Connection Manager, and it is set as the
default connection.
To make a PCS Vision connection:
1. From the PCS Connection Manager window, click the GO
button.
2. If the PCS Vision connection is the default connection,
then the connection will start. (This connection definition
is set up during installation.)
If more than one connection is defined and there is no
default set, then the Connections popup window
displays. Select the connection you want to use.
The PCS Connection Manager program initiates the
connection. Progress is shown in the message area
(“Dialing”, “Authenticating”). Once the connection is
established, the number of bytes received and transmitted
are displayed:
If you are running Windows 2000 or Windows XP and having
problems establishing a connection, see page 104.
Once the connection is established, you can use any Internet
application (such as Internet Explorer, Netscape Navigator,
or your email application).
To end a PCS Vision connection:
䊳 Click the Stop button.