User's Manual

Section 2: Installing the PCS Connection Card
28 2B: Installation on Handheld and Pocket PCs
䊳 Align the infrared port on your Handheld PC with an
infrared port on your host PC.
ActiveSync should launch automatically when the host and
Handheld/Pocket PC are connected.
Note: If you are unable to establish a connection, launch ActiveSync from
the Start menu and use the online help in ActiveSync.
2. If you are prompted to indicate whether you want to set
up a partnership, click Yes or No and click Next. (For the
purpose of downloading the PCS Connection Manager
Software, it does not matter whether you have a
partnership.) You should then be prompted that there is
software to download.
3. Click Yes to start the download. When complete, you will
be prompted to check your mobile device screen to see if
additional steps are required.
4. Click OK.
5. Reset your Handheld/Pocket PC by inserting the stylus
into the reset button. (The reset button is usually a
circular indentation that may be on the keyboard of the
Handheld PC or the bottom of the Pocket PC. Consult the
documentation that came with your PC if you do not
know how to reset the device.)
On completion of this step, the PCS Connection Manager
Software and the PCS Connection Card driver are installed
and you can proceed to activate your card. See “Activating
Your PCS Connection Card” on page 29.
Inserting and Removing the PCS Connection
Card
Inserting the PCS Connection Card
To insert the PCS Connection Card into a Pocket PC:
1. If the PCMCIA jacket accessory is not already attached,
slide the Pocket PC bottom first into the jacket. It should
click into place.
2. Attach the antenna to the circular copper connector on
the end of the card. DO NOT FORCE.