User's Manual

Section 2: Installing the PCS Connection Card
2A: Installation on Notebook PCs 17
7. Click OK when you are prompted to insert the
PCS Connection Card. Attach the antenna and insert the
card into your PC Card slot.
Note for Windows 98 and Me Users: If your computer has a built-in
network adapter, your computer may appear to have stopped responding
during the card detection process. The operating system is resolving
resource issues related to your built-in adapter and the PCS_Connection
Card. Do not abort the installation process. Allow several minutes for the
process to complete.
Note: Do not forcefully connect the antenna, or forcefully insert the
PCS Connection Card. This may damage connector pins.
8. Click OK when you are notified that the installation is
complete. If your operating system is Windows 98 SE or
Windows Me, restart your PC from the Start menu.
Note for Windows 98 and Me Users: If your computer has a built-in
network adapter, another long delay occurs the first time the
PCS_Connection Card is inserted after this reboot. Subsequent insertions
of the card will not experience the delay.
On completion of this step, the PCS Connection Manager
Software and the PCS Connection Card driver are installed
and you can proceed to activate your card. See “Activating
Your PCS Connection Card” on page 20.
Installing the PCS Connection Manager
Software (Windows XP)
Note: You may require administrative privileges, depending on your
Windows XP installation.
Installing the PCS Connection Manager Software:
1. If the PCS Connection Manager CD is not already in your
CD-ROM drive, insert it. The CD should auto-start and
display a menu.