Quick Reference Guide

28
PDT 80XX WWAN
A message
appears stating
that your
terminal’s
memory is full.
Too many files
stored on the
terminal.
Delete unused memos and records.
You can save these records on your
computer.
Memory allocation
too low.
Adjust the memory allocation. Select
Start, then Settings, and select the
System tab. Tap Memory and adjust
the slider.
Too many
applications
installed on the
terminal.
If you have installed additional
applications on your terminal, remove
them to recover memory. Select Start,
then Settings, and select the System
tab. Tap Remove Programs, select
the unused program and tap Remove.
Fail to
communicate with
IrDA printer.
Distance from
printer is between 5
inches and 39
inches.
Bring the terminal closer to the printer
or move it further away and attempt
communications again.
Obstruction
interfered with
communication.
Check the path to ensure no objects
were in the way.
Application is not
enabled to run IrDA
printing.
Printer support must be included with
the application to run IrDA printing on
the terminal. See your System
Administrator.
When receiving
beamed data an
out of memory
message
appears.
Not enough free
memory available
for receiving data.
Your terminal requires at least twice
the amount of memory available as
the data you are receiving. For
example, if you are receiving a 30K
application, you must have at least
60K free.
Beamed data
does not transmit.
Terminals too close
together or too far
apart.
Confirm that the terminals are at least
5 inches and at most 39 inches apart.
Also ensure that there is a clear path
between the two devices.
Insufficient room
lighting.
Adjust the room lighting or move to a
different location.
Problem Cause Solution
For Internal Use Only