User's Manual

6
PDT 7500 Series
Removing the Battery from the Terminal
To remove the Li-Ion battery from the terminal:
1. Suspend the terminal’s power.
2. Slide the battery release switch towards the top of the terminal
until the lock releases.
3. Lift the battery up and out of the battery compartment.
Charging the Battery in the Terminal
To charge the terminal’s battery, place the PDT 7500 in the cradle
or connect the synchronization/charging cable.
The terminal’s charging LED turns yellow while charging, then
turns green when the battery is fully charged, which takes 2-3
hours. A flashing yellow LED indicates there may be a problem with
the battery.
PRELIMINARY