Reference Guide

6-8
PDT 6800 Series Product Reference Guide
To clean a terminal, use a clean, soft cloth dampened with a mild cleaner such as soap and
water. Do not use abrasive paper, cloth, or abrasive/corrosive cleaners.
Wipe the entire terminal, except for the scanner window, with the damp cloth. Clean the
charging contacts, keypad, and scanner trigger.
Wipe the scanner window periodically with a lens tissue or other material suitable for
cleaning optical material such as eyeglasses.
Do not pour, spray, or spill any liquid on any part of the terminal, particularly the scanner or
scan element components.
Storage
If the terminal will not be used for a while, store it in a cool, dry place, away from dust. For
the best protection, repack the terminal in the original shipping container for storage.
Caution
If you remove the primary battery, the terminal maintains memory contents
for at least 15 minutes. To prevent loss of programs and data, transmit them
to a host computer before removing the primary batteries for longer than 15
minutes.
When you remove the terminal from storage without the battery pack, reset the real time
clock. Refer to the Series 3000 Application Programmer’s Reference Manual or Series 3000
Application Programmer’s Guide for specific instructions.