Reference Guide

1-3
Getting Started
Accessories
The following accessories are available for the PDT 6800 Series terminal.
Battery Chargers
The terminal uses a six-cell 600 mAh (intrinsically safe) Nickel Cadmium (NiCd) battery, or
a Lithium Ion battery.
The NiCd battery is charged using one of the following charging accessories:
!
CCM 38/6860 — Four-slot Charging and Communications Module (CCM) for
charging NiCd battery packs in the terminal and spare battery packs; also performs
communications between terminals and a host, modem, or printer.
!
CRD 38/6865 — Single-slot cradle for charging NiCd battery packs; also performs
communications between terminals and a host, a modem, or a printer.
!
CRD 38/6866 — Four-slot cradle for charging NiCd battery packs in the terminal
and for communicating between terminals and a host, a modem, or a printer.
!
UBC Charger — UBC 1000 or 2000 battery charger.
!
PC Adapter — Works with the Printer Interface Module (PIM) to communicate with
the host PC without a cradle or to charge a NiCd battery pack in the terminal
without a cradle.
The Lithium Ion battery is charged using the UBC 2000 charging adapter p/n 21-32665-24.
Printer Interface Module
The Printer Interface Module works with the PC Adapter to perform communications
between the terminal and a host PC or a printer without a cradle.
Radio and Network Options
Spectrum One Network
The PDT 6810 includes an internal radio frequency transmitter/receiver for use in a Symbol
Spectrum One network.
Spectrum24 Network
The PDT 6842, PDT 6845, and PDT 6846 include an internal radio frequency transmitter/
receiver for use in a Symbol Spectrum24 network. Refer to Spectrum24 Network Terminal
Technical Reference Guide, p/n 70-20193-XX, for more information.