Reference Guide

Table Of Contents

About This Guide

Series 3000 Application Programmer’s Reference Manual

p/n 70-16309-XX

Series 3000 System Software Manual

p/n 70-16310-XX

Series 3000 Application Developer’s Library

p/n 70-16311-XX

Spectrum24 Access Point User’s Guide

p/n 70-12057-XX

Spectrum24 Network Terminal Technical Reference Guide

p/n 70-20193-XX

Novell LAN Workplace Reference Manual

p/n 70-20288-XX

Spectrum24 TNClient System Administrator’s Guide

p/n 70-20244-XX

Spectrum24 STEP Installation and Configuration Guide for Series 3000 Flash Disk

Ter minals

p/n 70-20343-XX

Spectrum24 NDK Series 3000

p/n 70-20481-XX

Service Information

If you have a problem with your equipment, contact the Symbol Support Center for your

region. See page xii for contact information. Before calling, have the model number, serial

number, and several of your bar code symbols at hand.

Call the Support Center from a phone near the scanning equipment so that the service person

can try to talk you through your problem. If the equipment is found to be working properly

and the problem is symbol readability, the Support Center will request samples of your bar

codes for analysis at our plant.

If your problem cannot be solved over the phone, you may need to return your equipment for

servicing. If that is necessary, you will be given specific directions.

Note: Symbol Technologies is not responsible for any damages incurred

during shipment if the approved shipping container is not used.

Shipping the units improperly can possibly void the warranty. If the