Quick Reference Guide

Table Of Contents
14
68XX Series
The next prompt displays:
5. Enter the password RFPROT, then press the ENTER key. The
terminal continues to boot up. If a compatibility problem ex-
ists, the terminal pauses with an error message. Contact your
System Administrator.
Troubleshooting
Symptom Possible Cause Action
68XX does not
power on.
Battery is not installed. Verify that the 68XX has
power from a battery.
Battery is not charged. NiCd battery - Charge
the battery in the termi-
nal, or remove the battery
and charge in the spare
battery charging slot on
the CCM 38/6860 or
CRD 38/6866.
Lithium Ion - Remove the
battery from the terminal
and charge in a UBC
2000 adapter.
Low Battery
message.
The main battery pack
is running low.
NiCd battery - Place the
68XX in a cradle and re-
charge the battery.
OR
Power the 68XX off and
replace the battery.
Enter password