User manual
Table Of Contents
- Introduction
- Getting Started with the SPT 1500
- Starting the SPT 1500
- Using the SPT 1500
- Maintaining the SPT 1500
- Troubleshooting
- SPT 1500 terminal does not turn on:
- Low battery warning after replacing the batteries:
- No sound:
- SPT 1500 terminal turns itself off:
- SPT 1500 terminal doesn’t recognize my handwriting:
- Tapping the screen buttons or icons does not activate the corresponding feature:
- When I tap the icon, nothing happens:
- A message appears stating that your SPT 1500 terminal memory is full:
- Beamed data does not transmit:
- When receiving beamed data an out of memory message appears:
- Your SPT 1500 unit does not accept scan input:
- Resetting Your SPT 1500 Terminal
- Regulatory Information
1
Quick Reference
Introduction
Congratulations on your purchase of Symbol Technologies’ SP
1500 Terminal! The unique combination of pocket size, Personal
Information Management software, printing support and scanning
capability make this product superior for use in a wide range of
different applications.
This guide covers the procedures for the basic set up and use of the
terminal. The
SPT 1500 Product Reference Guide
(part number 70-
33757-xx) provides more in-depth detail about the applications
available on the SPT 1500. See your Reseller or call Symbol
Technologies to receive this document.
Getting Started with the SPT 1500
Before you can use your SPT 1500, you will need to perform some
basic set up procedures. First, familiarize yourself with the many
parts of the SPT 1500 by reviewing the following illustration.