User manual
Table Of Contents
- Introduction
- Getting Started with the SPT 1500
- Starting the SPT 1500
- Using the SPT 1500
- Maintaining the SPT 1500
- Troubleshooting
- SPT 1500 terminal does not turn on:
- Low battery warning after replacing the batteries:
- No sound:
- SPT 1500 terminal turns itself off:
- SPT 1500 terminal doesn’t recognize my handwriting:
- Tapping the screen buttons or icons does not activate the corresponding feature:
- When I tap the icon, nothing happens:
- A message appears stating that your SPT 1500 terminal memory is full:
- Beamed data does not transmit:
- When receiving beamed data an out of memory message appears:
- Your SPT 1500 unit does not accept scan input:
- Resetting Your SPT 1500 Terminal
- Regulatory Information
16
SPT 1500
Service Information
Before you use a terminal, it must be configured to run your applications.
If you have a problem with running your terminal or using your equipment, contact
your facility’s Technical or Systems Support. If there is a problem with the equipment,
they will contact the Symbol Support Center:
1-800-659-2240
Outside North America, contact your local Symbol representative.
Warranty
Symbol warrants that this product will be free from defects in materials and
workmanship, for a period of nine months from the date of shipment, provided that
the product remains unmodified and is operated under normal and proper conditions.
Damage due to shipping of the product to the customer is covered under this warranty.
Otherwise, this warranty does not cover damage due to external causes including
accident, misuse, neglect, problems with electrical power, tampering, servicing not
authorized by Symbol, failure to provide required preventive maintenance, and