User manual
Table Of Contents
- Introduction
- Getting Started with the SPT 1500
- Starting the SPT 1500
- Using the SPT 1500
- Maintaining the SPT 1500
- Troubleshooting
- SPT 1500 terminal does not turn on:
- Low battery warning after replacing the batteries:
- No sound:
- SPT 1500 terminal turns itself off:
- SPT 1500 terminal doesn’t recognize my handwriting:
- Tapping the screen buttons or icons does not activate the corresponding feature:
- When I tap the icon, nothing happens:
- A message appears stating that your SPT 1500 terminal memory is full:
- Beamed data does not transmit:
- When receiving beamed data an out of memory message appears:
- Your SPT 1500 unit does not accept scan input:
- Resetting Your SPT 1500 Terminal
- Regulatory Information
10
SPT 1500
Maintaining the SPT 1500
Your SPT 1500 is designed to be reliable and to provide years of
trouble-free service. However, you should observe the following
general tips when using your SPT 1500:
• Take care not to scratch the screen of your SPT 1500. When
working with your SPT 1500, use the supplied stylus or plas-
tic-tipped pens intended for use with a touch-sensitive screen.
Never use an actual pen or pencil or other sharp object on the
surface of the SPT 1500 screen.
• Your SPT 1500 is not waterproof and should not be exposed
to rain or moisture. Under harsh conditions, water may enter
the circuitry through the front panel buttons. In general, treat
your SPT 1500 as you would a pocket calculator or other
small electronic instrument.
• The touch-sensitive screen of your SPT 1500 contains a glass
element. Take care not to drop your SPT 1500 or subject it to
any strong impact. Do not carry your SPT 1500 in your back
pocket: if you sit on it, the glass may break.
• Protect your SPT 1500 from temperature extremes. Do not
leave your SPT 1500 on the dashboard of a car on a hot day,
and keep it away from heaters and other heat sources.
• Do not store or use your SPT 1500 in any location that is ex-
tremely dusty, damp or wet.
• Use a soft, damp cloth to clean your SPT 1500. If the surface
of the SPT 1500 screen becomes soiled, clean it with a soft
cloth moistened with a diluted window-cleaning solution.