User Manual

Preliminary
5
Quick Reference
Scan the entire symbol
• The scan beam must cross every bar and space on the symbol
(as in the left bar code below).
• The larger the symbol, the farther away you should hold the
scanner.
• Hold the scanner closer for symbols with bars that are close
together.
Right Wrong
Pair Scanner with Base/Charger
The wireless “connection” between the scanner and base/charger is
the low power radio transmission through RF transceivers in the
both the scanner and base/charger. The actual communication
consists of bidirectional message packets. However, the scanner and
base/charger must be paired for this communication to work
between the two devices.
To pair the scanner with the base/charger:
• Scan the
PAIRING
bar code below or the one on the base/
charger.
• Insert the scanner into the base/charger’s cradle. You have 15
seconds to do this, or there will be error beeps (4 beeps = un-
successful pairing or base not powered). Note that you cannot
PAIRING