User's Manual

19
When set to block calls, the phone displays the message:
Calls blckd
Unblock?
Press SND to unblock, press END to cancel. The phone returns to the
status display.
Maintaining Speed-Dial List
Adding a Number to the Speed-Dial List
To add or replace a number in the speed-dial list:
1. Dial a number. Do not press SND.
2. Press STO. A field appears for entering or replacing a two-digit speed-
dial extension.
3. Key in the two-digit location. The phone stores the number in the list, and
returns to the status display.
Clearing the Speed-Dial List
To clear existing speed-dial directory from the speed-dial list:
1. Press MENU. The phone displays the Main menu.
2. Use the *< and #> keys to scroll through the items.
3. Select User Options and press SND. The phone displays the NetVision
Data Phone user options.
4. Scroll through the user options.
5. Select Clear SD and press SND. The phone clears the speed dial list.
Hot Battery Swap
The NetVision Data Phone features a “hot battery swap”. When the phone
beeps to warn that the battery is about to reach a level that cannot support
phone functions, remove the battery without first powering off the phone and
install a fully charged battery. Install a fresh battery within 3 minutes before
the User Name and URL are lost. With the new battery installed, press SND;
the phone logs on, reassociates and redisplays the last URL page.
Because the radio circuitry uses the most power, the NetVision Data Phone
loses the active telephone call when the user removes the battery.