User's Manual

10
Receiving Intercom Calls
Telephones not in active conversation automatically answer an intercom call
after the first ring. The phone rings with the user-programmed intercom ring.
Each phone briefly displays the message Intercom from n. n
represents the group channel ID. The phone answers the call automatically
and changes the phone status to active.
Phones in active conversation give the intercom call-waiting tone (three
beeps) through the earpiece. The user can put the current call on hold or end
the current call. In both cases, the phone automatically connects to the
intercom call.
If a user ignores an intercom call while on another call, the phone joins the
intercom call (if still in progress) when the user ends or puts on hold the
current call.
Terminating Intercom Calls
To terminate the intercom call, the call originator presses END. All phones
display the Call Finished message and the channel is free for
another intercom call. If all the intercom participants quit the call, the
originator times out in 10 seconds, displays the Call Finished
message and frees the channel.
Other Ways to Dial
In name dialing, speed-dialing and redialing, the NetVision Data Phone
completes a call using the telephony style (gateway or IP) enabled on the
phone.
Redialing
The NetVision Data Phone stores the latest eight calls, including intercom
calls, calls made or received from the NetVision Data Phone or calls made to
the gateway. The NetVision Data Phone does not store the numbers for
external calls coming from the gateway.
To redial:
1. Press RCL to activate the NetVision Data Phone redial mode.
2. Press RCL repeatedly until the extension, IP address or name appears in
the LCD.
The NetVision Data Phone recall function stores the last eight numbers
displaying the most recent first.
Note: Pressing the scroll buttons or keys after pressing RCL displays the
speed-dial directory.
3. Press SND. The NetVision Data Phone completes the call.