User Manual
Table Of Contents
- MR400 RFID Reader Module
- Table of Contents
- About
- MR400 Integration GuideIntroduction
- InstallationMR400 RFID Reader Module, Integration GuideInstallation
- MR400 RFID Reader Module, Integration Guide
- MR400 RFID Reader Module, Integration GuideMR400 SpecificationsMR400 Specifications
- Regulatory InformationRegulatory InformationMR400 RFID Reader Module, Integration Guide
- Index
Appendix B: Regulatory Information B - 3
Reference Antenna
A reference antenna has been used during the approval process for the Reader Module. Specific details of the
reference antenna used for testing provided in the table below.
Important Regulatory Information:
Use of an antenna which the same 'type' (eg. Circular Polarized) and has a gain equal to or less that the
reference antenna can be used without recertification.
Use of an alternative antenna, different type or same type but higher gain will invalidate the FCC approval.
Under this instant the OEM integrator is responsible for re-evaluating the end product and obtaining a separate
FCC authorization.
Antenna Type: AN200:
Reader Module Regulatory Markings
Regulatory markings are applied to the Reader Module signifying it's approved for use in the following the
United States and Canada.
Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is
available at http://www2.symbol.com/doc/.
Table B-3
Antenna Characteristics
Parameter Performance
Model Number AN200
Symbol Part Number ANT-71720/1 0=Right 1=Left
Frequency (MHz) 902-928MHz
Gain (dBi) 6dBi
Polarization Circular
Azimuth and Elevation Beamwidth 60 degrees nominal
Connector Type Type N Female
VSWR (Return Loss) 20dB (1.22)
Input Power 20 Watts
Dimensions 11 x 11 x 1.9 in
Weight 3 lbs