User Manual
Table Of Contents
- MR400 RFID Reader Module
- Table of Contents
- About
- MR400 Integration GuideIntroduction
- InstallationMR400 RFID Reader Module, Integration GuideInstallation
- MR400 RFID Reader Module, Integration Guide
- MR400 RFID Reader Module, Integration GuideMR400 SpecificationsMR400 Specifications
- Regulatory InformationRegulatory InformationMR400 RFID Reader Module, Integration Guide
- Index
3 - 4 MR400 RFID Reader Module, Integration Guide
Read With Payload Command (31hex)
Only the first antenna port must be passed in the request packet while using this command with the MR400
reader. No Antenna combination options should be used with this command when using it with the MR400
since the MR400 does not support combination of antennas. For more information on this command refer to
the Matrics API Programmers Manual.
Kill Specific (32 hex)
This command can be used to kill a tag using the MR400 to ensure that it is not read with further read
operations. While using this command with MR400 always use the first antenna port of the reader while
forming the request packet. For more information on this command refer to the Matrics API Programmers
Manual.
Write Tag (33hex)
While using this command with MR400 always use the first antenna port of the reader while forming the
request packet. For more information on this command refer to the Matrics API Programmers Manual.