User Manual

2 - 2 MR400 RFID Reader Module, Integration Guide
MR400 Installation
Before installing the MR400 RFID reader module into the host equipment, consider the following:
• TBD
• TBD
• TBD
Housing Design
The RFID reader module housing design must protect the module from impact and adverse environments.
Environment
The RFID reader module must be sufficiently enclosed to prevent moisture and/or dust from interfering with the
MR400 operation.
Grounding
The RFID reader module is grounded through the host interface connector consists, pin no. 14 (see Host
Interface on page 1-4).
ESD
The RFID reader module are protected from ESD events that may occur in an ESD-controlled environment.
Always exercise care when handling the module. Use grounding wrist straps and handle in a properly
grounded work area. for ESD specifications, see ESD on page 1-6.
Location and Positioning
The general location and positioning guidelines provided, do not consider unique application characteristics. It
is recommended that an RFID engineer perform an analysis prior to integration.
Location and Positioning Guidelines:
• TBD
• TBD
• TBD