User Manual
Table Of Contents
- MR400 RFID Reader Module
- Table of Contents
- About
- MR400 Integration GuideIntroduction
- InstallationMR400 RFID Reader Module, Integration GuideInstallation
- MR400 RFID Reader Module, Integration Guide
- MR400 RFID Reader Module, Integration GuideMR400 SpecificationsMR400 Specifications
- Regulatory InformationRegulatory InformationMR400 RFID Reader Module, Integration Guide
- Index
Introduction 1 - 5
Mechanical Characteristics
The MR400 mechanical characteristics include the physical dimensions, the weight and the enclosure and EMI
shielding.
Dimensions
Dimensions: 85.6mm long, by 54mm wide, by 5 mm thick
Weight
Weight TBD
Enclosure and EMI Shielding
The MR400 is enclosed in a standard frame similar to PCMCIA type II card. The housing frame has two MMCX
board edge antenna connectors at one end, and a 14pin FFC/FPC connector at the other end for host
interface.
In addition to the enclosure, there are two internal EMI shields, one on each side of the board to compartment
isolate the RF and digital circuits on the PCB.