User Manual

Hardware and Technical Specifications MR 100 User Manual Page: 14
MR 100 User Manual
A. H ARDWARE AND T ECHNICAL S PECIFICATIONS
This section describes in details the specifications of hardware interfaces that are used with Symbol MR-100 Readers.
A.1. Physical Dimensions
Dimensions Length 3.4” x Width 2.1” x Height 0.3” (85.6 mm x 54 mm x 8 mm)
Weight ~ 2.5 Ounces (70 Grams)
Visual Status Indicator On-board LED for Radio On/Off indication
A.2. Power
Power Supply +6vDC @ 1.2 Amp (Regulated)
Operational Power Consumption 4.8 Watts (800 mA @ 6V)
Idle Power Consumption
(for Hot Standby)
300 mW (50 mA @ 6V)
A.3. Environmental
Condition Standard Value
Operational: -20° to +60° C (-4° to +140° F)
Temperature IEC 60068-2-1/2/14
Storage: -40° to +85° C (-40° to +185° F)
Humidity IEC 60068-30/56 5-95% Non-condensing
Vibration IEC 60068-2-6
Mechanical (also MIL-STD-202 - 213/B)
Sinusoidal (also MIL-STD-202 - 204/B)
Random (also MIL-STD-1344 - 2005)
A.4. Connectivity
Connector Type JST 14-Pin Connector (Part Number: JST SM14B-SRSS-TB)
Factory Option: Serial or TTL
Data Rate: Variable 19.2 / 38.4 / 57.6 and 115.2
Operational Power Consumption
Data Structures: 8 Data / 1 Stop / No Parity / No Flow Control
RF Connector U.FL (Low Profile 1.9 mm Height, 0.81 mm Dia) Coaxial