User Manual

Byte Stream Command List MR 100 User Manual Page: 11
MR 100 User Manual
4.9. Read With Payload Command (31
hex
)
Only the first antenna port must be passed in the request packet while using this command with the MR 100 reader. No
Antenna combination options should be used with this command when using it with the MR 100 since the MR 100 does
not support combination of antennas. For more information on this command refer to the Matrics API Programmers
Manual.
4.10. Kill Specific (32
hex
)
This command can be used to kill a tag using the MR 100 to ensure that it is not read with further read operations.
While using this command with MR 100 always use the first antenna port of the reader while forming the request
packet. For more information on this command refer to the Matrics API Programmers Manual.
4.11. Write Tag (33
hex
)
While using this command with MR 100 always use the first antenna port of the reader while forming the request
packet. For more information on this command refer to the Matrics API Programmers Manual.