User's Guide

MC909X User Guide4-2
Introduction
Accessing the Phone Keypad
The keypad can be accessed regardless of the program in use on the mobile computer. Applications on the mobile computer can be
in use during a call.
Figure 4-1. MC9094 Phone Keypads
Keypads can vary depending on services and the state of the phone. For example, calls can be placed on hold
and Swap can be used to switch active calls on hold. (See Three-way or Conference Calling on page 4-14.)
To access the phone keypad tap Start - Phone or press the green dot key on the mobile computer’s keypad.
To receive calls when the mobile computer is suspended, leave the phone radio turned on and ensure the
mobile computer is set to wake with any key.
Making a Call Using the Keypad
Phone calls can be dialed from the phone keypad, using speed dial or from call history. The most direct method is by using the phone
keypad.
To make a call using the phone keypad:
1. Tap Start - Phone or press the green dot key on the mobile computer’s keypad.
2. From the Phone keypad, tap the number to call.
3. Tap Talk.
4. Tap End to stop dialing or end the call.
The green and red dot keys on the mobile computer keypad can also be used to dial (green) and end (red) calls.
Answering a Call
A dialog box appears on the mobile computer’s display screen when an incoming call is received. If the phone is set to
ring, a ring tone sounds. The user has the option to answer the incoming call or ignore the call.
Antenna/Signal