User's Manual

8 - 8 MC75A Enterprise Digital Assistant User Guide
Single Slot USB/Serial Cradle
When trying to
connect a Bluetooth
phone and MC75A,
the phone thinks a
previously paired
MC75A is used.
The phone
remembers the
name and address
of the MC75A it last
paired with via the
Bluetooth radio.
Manually delete the pairing device and name from the phone. Refer
to the phone’s user documentation for instructions.
There is a delay in the
Bluetooth stack
re-initializing during a
resume from
suspend.
This is normal
behavior.
No solution required.
The Bluetooth
connection drops.
The MC75A
suspends and the
Bluetooth radio
power turns off.
When the MC75A suspends the Bluetooth connection is dropped.
Re-connect the Bluetooth connection when the MC75A returns from
suspend mode.
Table 8-2 Troubleshooting Bluetooth Connection (Continued)
Problem Cause Solution
Table 8-3 Troubleshooting the Single Slot USB/Serial Cradle
Symptom Possible Cause Action
LEDs do not light
when MC75A or spare
battery is inserted.
Cradle is not
receiving power.
Ensure the power cable is connected securely to both the cradle
and to AC power.
MC75A is not
seated firmly in the
cradle.
Remove and re-insert the MC75A into the cradle, ensuring it is
firmly seated.
Spare battery is not
seated firmly in the
cradle.
Remove and re-insert the spare battery into the charging slot,
ensuring it is firmly seated.
DRAFT