User's Manual
Table Of Contents
- Data Capture
- Using the Phone
- Introduction
- Accessing the Phone Keypad
- Turning the Phone On and Off
- Audio Modes
- Making a Call
- Making an Emergency Call
- Answering a Call
- Smart Dialing
- Muting a Call
- Taking Notes
- Using Speed Dial
- Using Call History
- Swapping Calls on an MC75A6
- Swapping Calls on an MC75A8
- Conference Calling on an MC75A6
- Three-way Calling on an MC75A8
- Text Messaging
- Using a Dual Line SIM
- Using GPS Navigation
- Using Bluetooth
Using the Phone 4 - 13
4. Tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed
dial location is reserved for voice mail.
5. Tap OK.
Editing a Speed Dial Entry
1. Tap Start > Phone or press the green phone key on the MC75A’s keypad.
2. Tap Speed Dial button.
Figure 4-19
Speed Dial Contact List
3. Tap and hold the contact name.
4. Tap Edit... .
5. Change the name, phone number, or location information.
6. Tap OK.
Deleting a Speed Dial Entry
1. Tap Start > Phone or press the green phone key on the MC75A’s keypad.
2. Tap Speed Dial button.
3. Tap and hold the contact name.
4. Tap Delete.
5. Tap Yes to confirm permanently deleting the speed dial entry.
NOTE Editing names and phone numbers in Speed Dial does not alter contact information in Contacts (Start
>
Contacts).
NOTE Deleting names and phone numbers in Speed Dial does not delete the contact information in Contacts (Start
>
Contacts).
DRAFT