User's Manual

ManualsBrandsSymbol Technologies ManualsElectronicsEnterprise Digital Assistant

Chapter 4

Using the MC7004/94/95 Phone

Chapter 4

Using the MC7004/94/95 Phone

Introduction

Use the MC7004, MC7094 and MC7095 phone to make phone calls, set up speed dials, keep track of calls,

and send text messages. Your wireless service provider may also provide other services such as voice mail,

call forwarding, and caller ID.

Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read

e-mail. Connect to the Internet or work network over GPRS (MC7004 and MC7094) or CDMA (MC7095) using

Cellular Line, or using the modem specified by the mobile operator. For more information, or to customize the

EDA phone by changing phone settings, see the MC70 Integrator Guide.

Accessing the Phone Keypad

Access the keypad regardless of the program in use. Applications on the EDA can be in use during a call.

Figure 4-1

Phone Keypads

To access the phone keypad tap

Start > Phone or press the green phone key on the EDA’s keypad.

To receive calls when the EDA is suspended, leave the phone radio turned on and ensure the EDA is set to

wake with any key.

Antenna/Signal

NOTE Keypads vary depending on services and the state of the phone. For example, place calls on hold and use

Swap to switch active calls on hold. (See Three-way or Conference Calling on page 4-14.)

PRELIMINARY

10/20/06

Summary of content (20 pages)

PAGE 1
Using the MC7004/94/95 Phone Chapter 4 R Y Chapter 4 Using the MC7004/94/95 Phone Introduction PR 10 E /2 LI 0/ M 06 IN A Use the MC7004, MC7094 and MC7095 phone to make phone calls, set up speed dials, keep track of calls, and send text messages. Your wireless service provider may also provide other services such as voice mail, call forwarding, and caller ID. Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read e-mail.
PAGE 2
4-2 MC70 User Guide Making a Call Using the Keypad Dial phone calls from the phone keypad using speed dial or from call history. The most direct method is using the phone keypad. To make a call using the phone keypad: Tap Start > Phone or press the green phone key on the EDA’s keypad. 2. From the Phone keypad, tap the number to call. 3. Tap Talk. 4. Tap End to stop dialing or end the call. Alternatively, use the green and red phone keys on the EDA keypad to dial (green) and end (red) calls.
PAGE 3
Using the MC7004/94/95 Phone 4-3 PR 10 E /2 LI 0/ M 06 IN A R Y To open Wireless Manager, tap the Connectivity icon. Figure 4-3 Opening Wireless Manager Select Wireless Manager. The Wireless Manager window appears. Figure 4-4 Wireless Manager To turn on or off the phone tap and hold its blue bar, then select On or Off. To configure settings for a connection, tap Menu > Phone Settings. NOTE To receive calls when your device is turned off, leave the phone turned on.
PAGE 4
MC70 User Guide PR 10 E /2 LI 0/ M 06 IN A Figure 4-5 Incoming Call R Y 4-4 To ignore the incoming call tap Ignore. This may send the caller to voice mail, depending on the service provider. Otherwise, this presents Busy to the calling party. To end the call tap End or press the red phone key on the EDA keypad. Audio Modes The EDA offers three audio modes to use during phone calls: • Speaker Mode: Use the EDA as if on speaker phone. Tap the Speaker On button to activate this mode.
PAGE 5
Using the MC7004/94/95 Phone 4-5 • To put a call on hold to call another number or answer an incoming call, tap Hold. To move from one call to another, tap Swap. Muting a Call To mute or unmute a call: R Y During a call, you can mute the microphone so you can hear the person on the line but he or she cannot hear conversation from the microphone. This is useful when there is conversation or background noise on your end. 1. Tap Start > Phone or press the green phone key on the EDA’s keypad. 2.
PAGE 6
4-6 MC70 User Guide Taking Notes To create a note during a call, tap Note on the display, then enter the note. For more information about creating notes see the Windows On-Device Help. To access a note created during a call: Tap Start > Phone or press the green phone key on the EDA’s keypad. 2. From the Phone keypad, tap Call History. 3. Tap and hold the number or the Note icon for the phone call entry containing the note. PR 10 E /2 LI 0/ M 06 IN A Note icon R Y 1.
PAGE 7
Using the MC7004/94/95 Phone 4-7 Using Speed Dial Create speed dial numbers to dial frequently called numbers with a single tap. Before creating a speed dial entry, ensure the phone number exists in Contacts. Adding a Speed Dial Entry R Y To add a speed dial entry from the phone keypad: Ensure the contact and phone number are in the Contacts list. 2. Tap Start > Phone or press the green phone key on the EDA’s keypad. 3. Tap Speed Dial > Menu > New. PR 10 E /2 LI 0/ M 06 IN A 1.
PAGE 8
MC70 User Guide PR 10 E /2 LI 0/ M 06 IN A Figure 4-12 Speed Dial Contact List R Y 4-8 7. Tap ok to exit the Speed Dial Contact List. To add a speed dial entry from the Contacts window: 1. Tap Start > Contacts. Figure 4-13 Contacts 2. Tap and hold the contact name.
PAGE 9
PR 10 E /2 LI 0/ M 06 IN A Figure 4-14 Contacts Menu 3. 4-9 R Y Using the MC7004/94/95 Phone Tap Add to Speed Dial. Figure 4-15 Speed Dial Contact Location 4. Tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail. 5. Tap ok. Editing a Speed Dial Entry 1. Tap Start > Phone or press the green phone key on the EDA’s keypad. 2. Tap Speed Dial.
PAGE 10
PR 10 E /2 LI 0/ M 06 IN A Figure 4-16 Speed Dial Contact List R Y 4 - 10 MC70 User Guide 3. Tap and hold the contact name. Figure 4-17 Speed Dial Delete Menu 4. Tap Edit... . 5. Change the name, phone number, or location information. 6. Tap ok. NOTE Editing names and phone numbers in Speed Dial does not alter contact information in Contacts (Start > Contacts). Deleting a Speed Dial Entry 1. Tap Start > Phone or press the green phone key on the EDA’s keypad. 2. Tap Speed Dial. 3.
PAGE 11
PR 10 E /2 LI 0/ M 06 IN A Figure 4-18 Speed Dial Delete Menu R Y Using the MC7004/94/95 Phone 4 - 11 4. Tap Delete. 5. Tap Yes to confirm permanently deleting the speed dial entry. NOTE Deleting names and phone numbers in Speed Dial does not delete the contact information in Contacts (Start > Contacts). Making a Speed Dial Call Use Speed Dial to call someone saved in the speed dial directory. To make a speed dial call: 1. Tap Start > Phone or press the green phone key on the EDA’s keypad. 2.
PAGE 12
4 - 12 MC70 User Guide Using Call History Use Call History to call someone who was recently called, or recently called in. Call History provides the time and duration of all incoming, outgoing, and missed calls. It also provides a summary of total calls and easy access to notes taken during a call. Table 4-1 lists the call history icons that appear in the Call History window. Table 4-1 Call History Icons Description R Y Icon This icon appears next to the contact information for all outgoing calls.
PAGE 13
Using the MC7004/94/95 Phone 4 - 13 Managing Call History Change views, reset the call timer, and delete calls to manage the calls stored in Call History. Changing the Call History View Tap Start > Phone or press the green phone key on the EDA’s keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap Menu > Filter to show the menu. PR 10 E /2 LI 0/ M 06 IN A R Y 1. Figure 4-21 Call History - All Calls/Show Menu 4.
PAGE 14
4 - 14 MC70 User Guide Select Call Timers... . PR 10 E /2 LI 0/ M 06 IN A Figure 4-23 Call History - Call Timers R Y 4. 5. Tap Reset. (The All Calls: counter cannot be reset.) 6. Tap ok to exit the Call Timers window. Deleting Call History Items by Call Date 1. Tap Start > Phone or press the green phone key on the EDA’s keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap Menu > Call Timers... . Figure 4-24 Call History - Call Timers 4.
PAGE 15
Using the MC7004/94/95 Phone 4 - 15 Deleting All Call History Items Tap Start > Phone or press the green phone key on the EDA’s keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap Menu. PR 10 E /2 LI 0/ M 06 IN A R Y 1. Figure 4-25 Call History - Tools Menu 4. Select Delete all calls. Figure 4-26 Call History - Delete All Dialog 5. Tap Yes. 6. Tap ok to exit the Call History window. Viewing Call Status 1.
PAGE 16
4 - 16 MC70 User Guide Tap an entry in the list to see the date, time, and duration of a call. PR 10 E /2 LI 0/ M 06 IN A Figure 4-27 Call History - Detail R Y 3. NOTE 4. When more than one call is on the phone line, only the duration of the first call is recorded. Tap ok to exit. Using the Call History Menu Use the Call History menu to dial voice mail, access the Activation Wizard, save to contacts, view a note, delete a listing, send an SMS, and make a call. 1.
PAGE 17
Using the MC7004/94/95 Phone 4 - 17 Using Contacts Use Contacts to make a call without looking up or entering the phone number. To make a call from Contacts: Tap Start > Contacts. 2. From the contact list, tap and hold the contact name. PR 10 E /2 LI 0/ M 06 IN A R Y 1. Figure 4-29 Contacts Menu 3. Tap Call Work. NOTE To make a call from an open contact, tap the number to call. See On-Device Help for more information about Contacts. Swapping Calls To move between two or more phone calls: 1.
PAGE 18
PR 10 E /2 LI 0/ M 06 IN A Figure 4-30 Call Swapping - Hold R Y 4 - 18 MC70 User Guide 3. Tap Hold to place the first number on hold. 4. Enter the second number and tap Talk. Figure 4-31 Call Conferencing - Conferencing 5. Tap Swap to move from one call to the other. 6. Tap End or press the red phone key on the EDA keypad to end each call. Conference Calling To create a conference phone session with two or more people and the initiator: 1.
PAGE 19
PR 10 E /2 LI 0/ M 06 IN A Figure 4-32 Call Swapping - Hold R Y Using the MC7004/94/95 Phone 4 - 19 3. Tap Hold to place the first number on hold. 4. Enter the second number and tap Talk. 5. Tap Hold to place the second number on hold. 6. Tap Menu > Conference to place the two numbers in conference mode. Figure 4-33 Creating a Conference Call 7. Tap End or press the red phone key on the EDA keypad to end the conference call.
PAGE 20
4 - 20 MC70 User Guide short message is stored and can be sent later. With the PCS networks based on GSM, CDMA, and TDMA technologies supporting SMS, SMS is a universal mobile data service. Sending a Message To send a message: Tap Start > Phone or press the green phone key on the EDA’s keypad to display the Phone keypad. 2. Tap Contacts. 3. Tap and hold on a contact and select Send Text Message. PR 10 E /2 LI 0/ M 06 IN A R Y 1. Figure 4-34 Tools Menu 4.