User's Manual

Wireless Applications 7 - 39
Registry Settings
Use a registry key to modify some of the parameters. The registry path is:
HKLM\SOFTWARE\Symbol Technologies, Inc.\Configuration Editor
Log On/Off Application
When the user launches the Log On/Off application, the EDA may be in two states; the user may be logged
onto the EDA by already entering credentials through the login box, or there are no user logged on. Each of
these states have a separate set of use cases and a different look to the dialog box.
User Already Logged In
If already logged into the EDA, the user can launch the login dialog box for the following reasons:
• Connect to and re-enable a cancelled profile. To do this:
- Launch the password dialog.
- Select the cancelled profile from the profile list.
- Login to the profile.
Table 7-27 Registry Parameter Settings
Key Ty pe Default Description
CertificateDirectory REG_SZ \\Windows The default directory to find certificates.
EncryptionMask REG_DWORD 0x0000001F Defines the supported encryption types. This is a
bitwise mask with each bit corresponding to an
encryption type.
1 = Type is supported
0 = Type is not supported
Bit Number Encryption Type
0None
140-Bit WEP
2128-Bit WEP
3TKIP
MenuShortCut REG_SZ Alt-M Describes the key combination to use for menu
selection. Tap-and-hold or use a key sequence to
display menus. This value can be a system key
sequence (i.e., preceded with ALT) or a single key
which triggers a pop-up menu when the appropriate
dialog is visible.
RefreshTime REG_DWORD 4000 This registry key defines the number of milliseconds
between refreshes of the Manage Profiles window.
NOTE Re-enable cancelled profiles using the Profile Editor Wizard and choosing to connect to the cancelled
profile. Cancelled profiles are also re-enabled when a new user logs on.
PRELIMINARY
10/20/06