User's Manual

7 - 22 MC70 Integrator Guide
Figure 7-31 Manage Profiles Context Menu
Changing Profiles
A completed profile is a set of configuration settings that can be used in different locations to connect to a
wireless network. Create different profiles to have pre-defined operating parameters available for use in
various network environments. When the WLAN Profiles window displays, existing profiles appear in the list.
Figure 7-32 Manage Profiles
Tap and hold a profile and select Connect from the pop-up menu to set this as the active profile. Once
selected, the EDA uses the authentication, encryption, ESSID, IP Config, and power consumption settings
configured for that profile.
Editing a Profile
Tap and hold a profile and select Edit from the pop-up menu to display the Profile Wizard where you can set
the ESSID and operating mode for the profile. Use the Profile Wizard to edit the profile power consumption and
security parameters. See Profile Editor Wizard on page 7-4.
PRELIMINARY
10/20/06