User's Manual

7 - 10 MC70 Integrator Guide
drop-down list of currently installed certificates before proceeding. The selected certificate’s name appears in
the drop-down list. If the required certificate is not in the list, install it.
Figure 7-10 Installed User Certificates Dialog Box
User Certificate Installation
To install a user certificate (EAP TLS only) and a server certificate for EAP TLS and PEAP authentication:
1. Tap Install Certificate. The Credentials dialog box appears.
Figure 7-11 Credentials Dialog Box
2. Enter the User:, Pwd: (password), and Server: information in their respective text boxes.
3. Tap Retrieve. A Progress dialog indicates the status of the certificate retrieval.
4. Tap ok to exit.
After the installation completes, the Installed User Certs dialog box displays.
Server Certificate Selection
If you select the Validate Server Certificate check box, a server certificate is required. Select a certificate on the
Installed Server Certificates dialog box. An hour glass may appear as the wizard populates the existing
certificate list. If the required certificate is not listed, install it:
1. Select a certificate from the drop-down list of currently installed certificates.
*********
NOTE To successfully install a user certificate, the EDA must already be connected to a network from which the
server is accessible.
PRELIMINARY
10/20/06