User Manual

Regulatory Information
All Symbol devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required. Any changes or
modifications to Symbol Technologies equipment, not expressly approved by
Symbol Technologies, could void the user's authority to operate the equipment.
CAUTION:
Only use Symbol approved and UL Listed accessories, battery packs and
battery chargers. Do NOT attempt to charge damp/wet mobile computers or
batteries. All components must be dry before connecting to an external power
source.
This guide is available in local languages, translations can be downloaded from
the following website: http://www.symbol.com/services/manuals/.
Power Supply
Use only a Symbol approved power supply (50-14000-147) output rated 5.4
VDC and minimum 3A. The power supply is certified to EN60950-1 with SELV
outputs. Use of alternative power supply will invalidate any approval given to
this device and may be dangerous.
Country Approvals
Regulatory markings are applied to the device signifying the radio (s) are
approved for use in the following countries: United States, Canada, Australia,
Japan and Europe 1,2.
Please refer to the Symbol Declaration of Conformity (DoC) for details of other
country markings. This is available at http://www2.symbol.com/doc/.
Note 1: For 2.4GHz Products: Europe includes, Austria, Belgium, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
Note 2: The use of 5GHz RLANs has varying restrictions of use; please refer to
the Symbol Declaration of Conformity (DoC) for details.
Operation of the device without regulatory approval is illegal.
Health and Safety Recommendations
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury
follow the recommendations below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your company's safety programs to
prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles (including safety systems). Check with the
manufacturer or its representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been added to your
vehicle.
An air bag inflates with great force. DO NOT place objects, including either
installed or portable wireless equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed
and the air bag inflates, serious injury could result.
Position your device within easy reach. Be able to access your device without
removing your eyes from the road.
Note: Connection to an alert device that will cause a vehicle horn to sound or
lights to flash, on receipt of a call on public roads, is not permitted.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a “to do” list or
flipping through your address book takes attention away from your primary
responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full attention to
driving. Check the laws and regulations on the use of wireless devices in the
areas where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your wireless device and any features such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice, and even heavy traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
5. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-
1 in the US, and 1-1-2 in Europe) or other local emergency number in the
case of fire, traffic accident or medical emergencies. Remember, it is a free
call on your wireless phone! The call can be made regardless of any
security codes and depending on a network, with or without a SIM card
inserted.
7. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in
Europe) or other local emergency number, as you would want others to do
for you.
8. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless number.
9. “The wireless industry reminds you to use your device / phone safely when
driving.”
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of
wireless devices.
Potentially Hazardous Atmospheres
You are reminded of the need to observe restrictions on the use of radio
devices in fuel depots, chemical plants etc. and areas where the air contains
chemicals or particles (such as grain, dust, or metal powders) and any other
area where you would normally be advised to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport
or airline staff. If your device offers a 'flight mode' or similar feature, consult
airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect
medical electrical equipment.
Wireless devices should be switched off wherever you are requested to do so
in hospitals, clinics or healthcare facilities. These requests are designed to
prevent possible interference with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15cm (6 inches)
be maintained between a handheld wireless device and a pacemaker to avoid
potential interference with the pacemaker. These recommendations are
consistent with independent research and recommendations by Wireless
Technology Research.
Persons with Pacemakers:
Should ALWAYS keep the device more than 15cm (6 inches) from their
pacemaker when turned ON.
Should not carry the device in a breast pocket.
Should use the ear furthest from the pacemaker to minimize the potential for
interference.
If you have any reason to suspect that interference is taking place, turn OFF
your device.
Hearing Aids
The wireless device may interfere with some hearing aids. In the event of
interference you may want to consult your hearing aid supplier to discuss
solutions.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to
determine if the operation of your wireless product may interfere with the
medical device.
RF Exposure Guidelines
Safety Information
The device complies with Internationally recognized standards covering
Specific Absorption Rate (SAR) related to human exposure to electromagnetic
fields from radio devices.
Reducing RF Exposure - Use Properly
It is advisable to use the device only in the normal operating position.
Phones (placed to ear or used with headset)
Use only Symbol tested and approved belt-clips, holsters, and similar
accessories to ensure FCC Compliance. The use of third-party belt-clips,
holsters, and similar accessories may not comply with FCC RF exposure
compliance requirements, and should be avoided. The FCC has granted an
Equipment Authorization for these model phones with all reported SAR levels
evaluated as in compliance with the FCC RF emission guidelines. SAR
information on these model phones is on file with the FCC and can be found
under the Display Grant section of http://www.fcc.gove/oet/fccid.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna used
for this transmitter must not be co-located or operating in conjunction with any
other transmitter/antenna except those already approved in this filing.
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated July 26, 2001.
EN60825-1:1994+ A1:2002 +A2:2001
IEC60825-1:1993+A1:1997+A2:2001
The laser classification is marked on one of the labels on the device.
Class 2 laser scanners use a low power, visible light diode. As with any very
bright light source, such as the sun, the user should avoid staring directly into
the light beam. Momentary exposure to a Class 2 laser is not known to be
harmful.
Scanner Labeling
Radio Frequency Interference Requirements
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Radio Transmitters
This device complies with RSS 210 of Industry & Science Canada. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Label Marking: The Term “IC:” before the radio certification only signifies that
Industry Canada technical specifications were met.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d)
which will ensure the product operates on the correct channels for the particular
country of use.
Ad-Hoc Operation
Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this
band is restricted to Indoor Use Only, any other use will make the operation of
this device illegal.
Bluetooth
®
Wireless Technology
This product contains Bluetooth Complimentary Subsystems:
BT ID:B01825
BT ID:B02413
Marking and European Economic Area (EEA)
The use of 2.4GHz RLANs, for use through the EEA, have the following
restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the frequency
range 2.400 -2.4835 GHz
• France, outside usage is restricted to 2.4 - 2.454 GHz.
• Italy requires a user license for outside usage.
The use of 5GHz RLANs has varying restrictions for use within the EEA; please
refer to the Symbol Declaration of Conformity (DoC) for details at http://
www2.symbol.com/doc/.
Bluetooth
®
Wireless Technology for use through the EEA has the following
restrictions:
• Maximum radiated transmit power of 100mW EIRP in the frequency range
2.400 -2.4835 GHz
• France, outside usage is restricted to 10mW EIRP
• Italy requires a user license for outside usage.
Statement of Compliance
Symbol Technologies, Inc., hereby, declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive 1999/
5/EC. A Declaration of Conformity may be obtained from http://
www2.symbol.com/doc/
Other Countries
Mexico - Restrict Frequency Range to: 2.450 - 2.4835 GHz.
Sri Lanka- Restrict Frequency Range to: 2.400 - 2.430 GHz.
Waste Electrical and Electronic Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be
returned to Symbol for recycling. For information on how to return product,
please go to: http://www.symbol.com/environmental_compliance.
Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til
recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter
på: http://www.symbol.com/environmental_compliance.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer
Lebensdauer zum Recycling an Symbol zurückgesandt werden. Informationen
zur Rücksendung von Produkten finden Sie unter http://www.symbol.com/
environmental_compliance.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada
taaskasutamise eesmärgil Symbol'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi: http://www.symbol.com/
environmental_compliance.
Español: Para clientes en la Unión Europea: todos los productos deberán
entregarse a Symbol al final de su ciclo de vida para que sean reciclados. Si
desea más información sobre cómo devolver un producto, visite: http://
www.symbol.com/environmental_compliance.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de
vie doivent être retournés à Symbol pour recyclage. Pour de plus amples
informations sur le retour de produits, consultez : http://www.symbol.com/
environmental_compliance.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del
rispettivo ciclo di vita devono essere restituiti a Symbol al fine di consentirne il
riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente
sito Web: http://www.symbol.com/environmental_compliance.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Symbol
vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának
módjával kapcsolatos tudnivalókért látogasson el a http://www.symbol.com/
environmental_compliance weboldalra.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van
hun levensduur naar Symbol te worden teruggezonden voor recycling.
Raadpleeg http://www.symbol.com/environmental_compliance voor meer
informatie over het terugzenden van producten.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser
devolvidos à Symbol para reciclagem. Para obter informações sobre como
devolver o produto, visite: http://www.symbol.com/environmental_compliance.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe
vrniti podjetju Symbol za reciklažo. Za informacije o vraèilu izdelka obišèite:
http://www.symbol.com/environmental_compliance.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava
kierrätettäväksi Symbol-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja
tuotteen palauttamisesta on osoitteessa http://www.symbol.com/
environmental_compliance.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste
returneras till Symbol för återvinning. Information om hur du returnerar
produkten finns på http://www.symbol.com/environmental_compliance.