User Manual

2 - 12 MC55 User Guide
LED Indicators
The MC55 has three LED indicators. The Scan/Decode LED indicates status for scanning. The Charging/Battery
Status LED indicates battery charging and status. The Radio Status LED indicates WAN radio status. Table 2-6
describes the LED indications.
Figure 2-9 LED Indicators
Table 2-6 LED Indications
LED State Indication
Scan/Decode LED
Solid Green Successful decode/capture.
Solid Red Laser enabled, scanning/imaging in process.
Off Not enabled.
Charging/Battery Status LED
Slow Blinking Amber Main battery in MC55 is charging.
Solid Amber Main battery in MC55 is fully charged.
Fast Blinking Amber Charging error.
Off Not charging.
Single Blink Amber (when Power button pressed) Battery depleted.
Blinking Amber (when Power button pressed) Battery over-temperature condition.
Radio Status LED
Slow Blinking Green WAN radios is on.
Off WAN radio is off.
Scan/Decode
LED
Charging/Battery
Status LED
Radio
Status LED
NOTE For information about scanning/decoding, see Data Capture on page 2-32. For information about WAN radio
status and settings, see Chapter 5, Using the Phone, or refer to the MC55 Integrator Guide.
DRAFT