User Manual

6 - 8 MC55 User Guide
Four Slot Battery Charger
This section describes how to use the Four Slot Battery Charger to charge up to four MC55 batteries.
MC55 Battery Shim Installation
Before charging a battery, snap the MC55 shim into the battery slot as shown in Figure 6-9.
Figure 6-8 MC55 Battery Shim Installation
Battery Charging
1. Connect the charger to a power source.
2. Insert the battery into a battery charging well and gently press down on the battery to ensure proper contact.
Shim
NOTE To purchase additional shims, contact your local account manager or Motorola, Inc. Part number:
KT-76490-01R.
DRAFT