User's Manual

Special Considerations 6 - 11
4. On the Cradle Applications menu, click Cradle Utility.
5. Click the Settings tab to set the cradle information:
a. Row ID: The cradle row number in the dispenser wall.
b. Column ID: The cradle column number in the dispenser wall.
c. Wall ID: The number of dispenser wall where the cradle is positioned.
d. Unlock Period: The number of seconds that pass from the time the unlock signal is received to
unlocking the MC18 from the cradle.
e. Unlock: Press Unlock to manually unlock the MC18 from the cradle.
f. LED: Check the LED box to enable the cradle LED indication.
g. Smooth Effect: Check the Smooth Effect box to enable soft on/off blink of LED.
h. LED Setting > On: The cradle LED is set to blink during unlock. Set the duration that the LED remains
off.
i. LED Setting > Off: The cradle LED is set to blink during unlock. Set the duration that the LED will
remains off during a blink.
j. LED Setting > Count: The cradle LED is set to blink during unlock. Set the number of blinks that the
LED after receiving an unlock signal.
k. Blink: Click to test the cradle LED operation.
l. Write Data: Program the information shown on the screen to the cradle memory.
m. Reset Row: Remove row information from the cradle memory.
n. Reset Column: Remove column information from the cradle memory.