User's Manual

Special Considerations 6 - 9
1. After resetting the cradle, the application starts the firmware download process.
2. When Download Complete is displayed on the screen, the firmware update process is completed
successfully. Click Unlock Cradle to unlock and remove the MC18 from the cradle.
Setting and Controlling the Cradle
The Cradle Utility application allows to manually set and control cradle features.
• Unlock: enables to set a 10 to 30 seconds time-out delay before the MC18 is releases from the cradle.
• Cradle Information: Setting or retrieving the cradle ID and location (row, column and dispenser wall).
• Setting the cradle charging rate: Depending on the cradle installation configuration, the store technician
can configure each individual cradle slots to enable/disable fast charge. Each cradle can be configured
NOTE Setting and Controlling the cradle can also be done through the Pocket Browser application.
NOTE The cradle ID and location information and charge settings is retained across firmware upgrades.