User Manual

Quick Reference
8
Host Types
Parameter Standard ICL FUJITSU NIXDORF
Mode A/
Mode B
Transmit
Code ID
No Yes Yes Yes
Data
Transmission
Format
Data as is Data/Suffix Data/Suffix Data/Suffix
Suffix CR/LF CR CR CR
Baud Rate 9600 9600 9600 9600
Parity None Even None Odd
Hardware
Handshaking
None RTS/CTS
Option 3
None RTS/CTS
Option 3
Software
Handshaking
None None None None
Serial
Response
Time-out
2 Sec. 9.9 Sec. 2 Sec. 9.9 Sec.
Stop Bit
Select
One One One One
ASCII Format 8-Bit 8-Bit 8-Bit 8-Bit
Beep On
<BEL>
Disabled Disabled Disabled Disabled
RTS Line
State
Low High Low *Low = No
data to send
*In the Nixdorf Mode B, if CTS is Low, transmission of scan data is
disabled. When CTS is High, bar code data is transmitted to the host.