LA-5127 Integration Guide USA – FCC 12th July 2007 LA-5127 Integration Guide Copyright 2006 Symbol Technologies, Inc.
XXXXXXXXXX Rev X Table of Contents 1. 2. INTRODUCTION 1.1 BACKGROUND 3 1.2 PART NUMBERS 3 1.3 KEY FEATURES AND STANDARDS SUPPORTED 3 1.4 USER PROFILES 4 HARDWARE 2.1 4 4 4 4 5 6 3.1 FINAL PRODUCT COMPLIANCE 6 3.2 REGULATORY STANDARDS 8 3.3 REGULATORY APPROVALS 8 Initial Release 8 3.4 REFERENCE ANTENNA (APPLICABLE TO CONNECTOR VERSION CARD) 8 3.5 RADIO CARD REGULATORY MARKINGS 8 3.6 NATIONAL COUNTRY REQUIREMENTS 8 3.6.1 5.
XXXXXXXX Rev X 1. Introduction 1.1 Background LA-5127 is the next generation CF client card for embedded solutions and is intended for OEM customers. 1.2 Part Numbers LA-5127 CF card will come in two SKUs: Part Number LA-5127-1002 LA-5127-1020 SKU External Antenna Version Internal Antenna Version 1.3 Key Features and Standards supported LA-5127 CF Card supports all required modes of operation as an 802.11g Mobile Unit (MU). In 802.
XXXXXXXX Rev X 1.4 User Profiles • The LA-5127 product is optimized for embedded, mobile enterprise and industrial applications where security, feature and technical service are required. • Mobile workers in healthcare, education, retail, manufacturing, hospitality and other industries with 802.11b, and 802.11g wireless LAN access. • Corporate Symbol device users with Wi-Fi wireless LAN access at the office, or with a subscription to a public wireless LAN. 2. Hardware 2.1 Hardware Environment 2.1.
XXXXXXXX Rev X 12 13 14 2467 2472 2484 EU, Japan EU, Japan Japan Table 1. IEEE 802.11g Channels 2.1.4 Electrical Interface The electrical interface for LA-5127 is PC16. The chipset used supports this interface; therefore no external component is required. The host must support the PC16 interface as well. The card uses only the 16-bit interface. LA-5127 CF card Integration Guide Copyright 2004 Symbol Technologies, Inc. Confidential Material – Disclosure Strictly Prohibited.
XXXXXXXX Rev X 3. Regulatory Legal Disclaimer: This Guide may contain information on regulatory matters. The information should be used with the understanding that Symbol is not engaged in rendering any legal, regulatory or other professional opinion. Each country has specific laws and regulations governing the use of radio communications. Please consult the official code for each country of interest.
XXXXXXXX Rev X AS THE INTEGRATOR, YOU ARE RESPONSIBLE TO DETERMINE WHAT ADDITIONAL SPECIFIC REGULATORY REQUIREMENTS ARE REQUIRED OF THE COUNTRY IN WHICH YOUR PRODUCT WILL BE MARKETED. FINAL PRODUCT MAY REQUIRE NON-RADIO FREQUENCY APPROVALS SUCH AS PRODUCT SAFETY, EMC, AND SAR. 3.2 Reference Antenna (applicable to connector version card) A reference antenna has been used during the approval process for the connector version radio card.
XXXXXXXX Rev X Antenna gain and Cable loss: ML-2452-APA2-01@2.4GHz gain(dBi) Cable loss(dB) Net gain(dB) 3 0.9 2.1 3.3 Regulatory Standards LA-5127 has been approved to comply with the standards listed below Electrical Safety: RF Certified to UL / cUL 60950-1, IEC / EN60950-1 USA: FCC Part 15.247 EMI/EMS: North America: FCC Part 15 3.4 Regulatory Approvals The LA-5127 will be approved in the countries identified in the tables below. 3.4.
XXXXXXXX Rev X End-product requirements with this module installed should include: • FCC Part 15 (emissions class B) Final product markings must include: Integral Antenna External Antenna Contains an approved Radio Module Model: LA-5127A2 FCC ID: H9PLA5127A2 Contains an approved Radio Module Model: LA-5127C2 FCC ID: H9PLA5127C2 Important Notes 1. Co-location The FCC approval EXCLUDES co-location with any other transmitter.
XXXXXXXX Rev X 4. Statements required for the User Guide The following statements are required in the final product user guide. Many on the statements are dependent on the application of the final product. Symbol recommends that the OEM seeks the advice from an accredited test laboratory. 4.1.1 General Statements Any changes or modifications not expressly approved by , could void the user’s authority to operate the equipment. 4.1.
XXXXXXXX Rev X Radio Frequency Interference Requirements – FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
XXXXXXXX Rev X 5. Appendix 1: Product Mechanical Interface Drawing The following drawings show the Product physical size and shape, LED indicator and connector locations and pin assignments. Red arrow shows the primary antenna connector. LA-5127 CF card Integration Guide Copyright 2004 Symbol Technologies, Inc. Confidential Material – Disclosure Strictly Prohibited.
XXXXXXXX Rev X LA-5127 CF card Integration Guide Copyright 2004 Symbol Technologies, Inc. Confidential Material – Disclosure Strictly Prohibited.
XXXXXXXX Rev X LA-5127 CF card Integration Guide Copyright 2004 Symbol Technologies, Inc. Confidential Material – Disclosure Strictly Prohibited.
XXXXXXXX Rev X LA-5127 CF card Integration Guide Copyright 2004 Symbol Technologies, Inc. Confidential Material – Disclosure Strictly Prohibited.
