User's Manual

XXXXXXXX Rev X

LA-5127 CF card Integration Guide

Confidential Material – Disclosure Strictly Prohibited.

4. Regulatory

Legal Disclaimer: This Guide may contain information on regulatory matters. The

information should be used with the understanding that Symbol is not engaged in

rendering any legal, regulatory or other professional opinion. Each country has

specific laws and regulations governing the use of radio communications. Please

consult the official code for each country of interest. Symbol does not warrant

the accuracy of the information contained herein and accepts no liability or

responsibility for any use or misuse of the information

Symbol’s wireless network devices are designed to be compliant with rules and

regulations in locations they are sold.

Any changes or modifications to Symbol Technologies equipment, not expressly

approved by Symbol Technologies, could void the user’s authority to operate the

equipment.

The OEM integrator must NOT provide information in the user guide of the

end product regarding how to install or remove this RF module.

4.1 Final Product Compliance

The model number used for Regulatory Approvals is LA-5127C1

The LA-5127 has been regulatory approved for OEM integrations which meet the

following conditions:

1. The radio integration is embedded

2. The antenna must be installed such that 20 cm is maintained between the

antenna and users

3. The ‘Type’ and ‘Gain’ of the antenna selected for the integration of the

external antenna must meet the requirements as detailed in section 8.

Used outside of these conditions will trigger re-approval. Symbol advises the use

of an accredited test laboratory for advice. Be prepared, the certification process

for your product may take from a few weeks to several months.